The genus Vicia L., one of the earliest domesticated plant genera, is a member of the legume tribe Fabeae of the subfamily Papilionoideae (Fabaceae). The taxonomic history of this genus is extensive and controversial, which has hindered the development of taxonomic procedures and made it difficult to identify and share these economically important crop resources. Species identification through DNA barcoding is a valuable taxonomic classification tool. In this study, four DNA barcodes (ITS2, matK, rbcL and psbA-trnH) were evaluated on 110 samples that represented 34 taxonomically best-known species in the Vicia genus. Topologies of the phylogenetic trees based on an individual locus were similar. Individual locus-based analyses could not discriminate closely related Vicia species. We proposed a concatenated data approach to increase the resolving power of ITS2. The DNA barcodes matK, psbA-trnH and rbcL were used as an additional tool for phylogenetic analysis. Among the four barcodes, three-barcode combinations that included psbA-trnH with any two of the other barcodes (ITS2, matK or rbcL) provided the best discrimination among Vicia species. Species discrimination was assessed with bootstrap values and considered successful only when all the conspecific individuals formed a single clade. Through sequencing of these barcodes from additional Vicia accessions, 17 of the 34 known Vicia species could be identified with varying levels of confidence. From our analyses, the combined barcoding markers are useful in the early diagnosis of targeted Vicia species and can provide essential baseline data for conservation strategies, as well as guidance in assembling germplasm collections.

Yams (Dioscorea spp.) are one of the main root and tuber crops in the world, especially within the species complex Dioscorea cayenensis/D. rotundata. Few studies have been conducted in Brazil with these species, including genetic diversity. The objective of this study was to characterize the genetic diversity of local varieties of D. cayenensis and D. rotundata using morphological and molecular markers, and provide information on the management and use of the crop by family farmers from different regions in Brazil. Thus, yam tubers were sampled from several municipalities in the South, Southeast and Northeast regions. Eighteen morphological traits and ten microsatellite loci were used to analyse 47 yam accessions (23 D. cayenensis and 24 D. rotundata). Species identification was carried out after field morphological evaluation. Spatial genetic analysis indicated significant structure among the local varieties, mostly between regions and species. Both cluster and Bayesian analyses showed a separation of the accessions into two distinct groups: group I with accessions originated from the Southeast region and group II with accessions originated from the Northeast region, while accessions from the South region were intermediate or included in either group. The results showed a separation between D. cayenensis and D. rotundata accessions in Brazil, and that D. cayenensis occurs predominantly in the Southeast region, while D. rotundata occurs in the Northeast region. Further studies with larger sampling would be welcome in order to confirm these findings. Also, this study highlights the importance of family farmers in the genetic diversity conservation of these species in Brazil.

Molecular variability of vanilla (Vanilla planifolia) and three wild species was assessed to explore the possible sources of variation that can be used for crop improvement. A total of 154 ISSR loci were analysed by the UPGMA, assignment tests of individuals (STRUCTURE) and indices of genetic diversity. The assignment tests were done at two levels: first considering the four species and then only the accessions of V. planifolia. The molecular analysis indicated 99.3% polymorphism among all species and 70.45% within V. planifolia. The UPGMA showed the separation of these four species into three groups and grouped V. planifolia accessions into three subgroups. The more genetically differentiated accessions were of the Rayada morphotype and a wild accession was from Oaxaca, followed by a wild accession from Quintana Roo; all the commercial accessions of V. planifolia (Mansa morphotype) were grouped together. The STRUCTURE analysis differentiated between V. planifolia and the three wild species, and among the accessions of the Mansa and Rayada morphotypes and the wild accessions. The STRUCTURE analysis also indicated the presence of mixed individuals. These results are of great importance since the accessions of V. planifolia that are genetically more differentiated are the most threatened due to the scarcity of these individuals, the destruction of habitat and replacement by the commercial morphotype. These individuals should be salvaged and used to expand the genetic background of vanilla.

The north-western Himalaya is one of the rich repositories of wheat genetic resources because of the preponderance of locally developed traditional crop varieties owing to high agro-climatic heterogeneity and local socio-cultural diversity. In the present study, 100 wheat landraces of this diversity rich region were evaluated for variability in physical parameters of seed to understand the basis of resistance against rice weevil, Sitophilus oryzae. The evaluation was based on the parameter of growth index (GI) of S. oryzae in different landraces. GI was correlated with different quantitative physical seed parameters, viz. hardness, length, width, length × width, test weight and qualitative parameter seed colour were studied to work out if these were related to resistance/susceptibility. Based on the parameter of GI, the six landraces viz. IC266831, IC266872, IC393109, IC392578, IC444217 and IC589276 were identified as resistant. Correlation coefficients between GI of S. oryzae and physical parameters of wheat landraces indicated that GI had significant positive relation with length × width (r = +0.573) and test weight (r = +0.549) indicated that small seeds confer resistance to S. oryzae. Also significant negative relation (r = −0.457) with GI of S. oryzae and seed hardness, indicated that hard seeds were relatively more resistant to S. oryzae.

Population structure and linkage disequilibrium (LD) were investigated in a set of 395 bread wheat landraces including 154 spring, 193 winter, two facultative wheat and 46 unknown growth type collected from different geographical regions of Iran. A total of 53 microsatellite markers distributed in three genomes of wheat were assayed for polymorphism. The 312 polymorphic alleles were served to estimate population structure and analyse the genome-wide LD. The number of alleles ranged from 2 to 18 with an average of 5.89 alleles/locus. Mean of polymorphic information content was 0.6 with a range of 0.15–0.86 and gene diversity varied from 0.16 to 0.88 with an average of 0.64. The population of landraces was highly structured and based on distance-and model-based cluster analyses the 395 landraces were assigned into eight subpopulations: SG1–SG8. Population structure estimates based on simple sequence repeat (SSR) marker data were quantified in a Q matrix and used in calculation of LD between pair of markers. A low overall LD level found in 12–13% (166) of the SSR marker pairs showed significant pairwise LD in r2 ≥ 0.01 and P ≤ 0.001 and six pair showed r2 ≥ 0.05 with P ≤ 0.001. LD clearly decays within the genetic distance of 40–60 cM with r2 ~ 0.05. The results of this study should provide valuable information for future association mapping using this wheat collection.

Hybrid breeding relies on selection of genetically unrelated and complementary parents for key traits. The objective of this study was to examine genetic variation and identify unique sorghum genotypes using phenotypic and simple sequence repeat (SSR) markers and to determine their relationships with combining ability and heterosis for grain yield. A total of 32 landraces and four cytoplasmic male sterile (CMS) lines were phenotyped using 25 agro-morphological traits and genotyped with 30 polymorphic SSR markers. The landraces were crossed with four CMS lines using a line × tester mating design. The 128 hybrids, 36 parentals and four check varieties were field-evaluated using a 12 × 14 alpha lattice design with three replications. General combining ability (GCA), specific combining ability (SCA) and heterosis for grain yield were determined. Genetic distance estimates ranged from 0.39 to 0.60 and 0.50 to 0.79, based on phenotypic and SSR markers, respectively. Landraces 72572, 75454, 200654, 239175, 239208, 244735A and 242039B and CMS lines ICSA 743 and ICSA 756 displayed positive and significant GCA effects for grain yield. Based on the SCA effects of yield, lines were classified into three heterotic groups aligned to the different cytoplasmic systems of testers. Lines with high GCA effects rendered hybrids with highly significant SCA effects with high mid-parent heterosis (MPH) for grain yield. Both marker systems were effective in demarcating sorghum genotypes that provided desirable cross-combinations with high combining ability effects and MPH for grain yield. The selected genotypes are recommended as potential parents for sorghum hybrid breeding in moisture stress environments.

Niger (Guizotia abyssinica, L.) is a desirable oilseed crop for birdseed, especially for finches (Spinus spp.) because of its high ratio of unsaturated to saturated fatty acids and relatively high oil content. In 2012, phenotypic traits, seed oil and fatty acid content measurements were made on 14 plant introductions (PIs) from the United States Department of Agriculture germplasm collection. The PIs originated in Ethiopia (ten), India (three) and USA (one). The phenotypic traits analysed included seed/plant, branches/plant, capitula/plant1, average seed/capitulum and plant height. After initial assessments of the 14 PIs, three were selected for use as parents to produce two one-way and two two-way F1 crosses for the purpose of evaluating self-incompatibility (SI). Parent and F1 progeny seeds were planted in a greenhouse and transplanted to a field site at the East Tennessee Research and Education Center (2012, 2013 and 2014). Comparisons from 2012 showed seed oil of the 14 PIs ranging from 32.9 to 37.9% (PI 508076 (Ethiopia) and PI 509436 (India), respectively). Major fatty acids included stearic, palmitic, oleic and linoleic; with linoleic acid in highest amount. PI508079 (Ethiopia) had the best combination of seed yield, seed oil and linoleic acid content. Over 2013 and 2014, SI ranged from 91.1 to 100.0%. W6 18860 (USA) had the most self-compatibility, and the F1 plants generated from crosses between W6 18860 and other plants tended to be self-compatible when the former was used as a pollen recipient. The results obtained from this study should be useful for niger breeding and production purposes.

Fungal blast disease is one of the major constraints in finger millet production. Breeding for disease resistance in finger millet, needs characterization of genetic polymorphism among and between the resistant and susceptible genotypes. In total, 67 finger millet genotypes, which are resistant or susceptible to fungal blast disease, were analysed using sequence-related amplified polymorphism (SRAP) and simple sequence repeat (SSR) markers to assess genetic variations and select diverse parents. Twelve each of SRAP and SSR primers produced 95.1 and 93.1% polymorphic bands and grouped them into unweighted pair-group method with arithmetic average clusters. Two of the finger millet genotypes, IE 4709 (blast resistant) and INDAF 7 (susceptible) were distinguished as most diverse genotypes as parents. Several genotype-specific bands observed with SSR primers are potential in developing genotype-specific markers. A high genetic diversity within the resistant and susceptible genotypes, rather than between them, was revealed through Nei's gene diversity (h) index and analysis of molecular variance. The finding helps us to understand the extent of genetic polymorphism between blast disease resistant and susceptible finger millet genotypes to exploit in resistance breeding programs.

In a germplasm bank collection the conservation and characterization of genetic resources is a prerequisite in order to use the material in breeding projects aiming the creation of new cultivars. In the present study, 54 Prunus salicina domestica and Prunus domestica genotypes (including seven Greek cultivars), maintained in the ex situ National Genebank Collection of Greece, were classified using microsatellite (simple sequence repeat, SSR) markers on high resolution melting (HRM) analysis. The SSR primer pairs were chosen from the published literature as originally designed on Prunus species. This combined approach was used to genotype all plum accessions of the collection highlighting the benefits of either method (HRM and SSRs) for cultivar identification. Dendrograms for P. domestica and P. salicina and a combined one with all the genotypes assayed were produced. A total of 15 from the 19 P. domestica accessions analysed, including all the Greek accessions but ‘Avgati Skopelou’, were grouped into the same clade in the combined dendrogram, whereas the remaining four were dispersed into the P. salinica clades. Bayesian structure analysis confirmed that ‘Avgati Skopelou’ differs from the rest of the Greek plum cultivars since it was not grouped into the same cluster. The combination of HRM and SSRs, provided a considerably faster, cost-effective, closed-tube microsatellite genotyping method for molecular characterization of plum cultivars.

Genetic diversity of a red clover global collection was assessed using 36 simple sequence repeat (SSR) primers representing all seven linkage groups (LGs). The number of fragments amplified ranged from 1 to 6 for all the primers. Primer RCS0060 detected highest number of fragments, whereas four SSRs viz., RCS0899, RCS1594, TPSSR40 and RCS6927 amplified single fragment. Size range of amplicons generated by all the primers varied from 100 to 400 bp. Polymorphism information content values ranged from 0.301 to 0.719 with an average value of 0.605. LG wise diversity analysis showed that LG 3 was most diverse (I = 0.65, Ht = 0.44), whereas LG-1 showed minimum diversity (I = 0.48, Ht = 0.26) for the microsatellites used. Bayesian model-based clustering inferred three genetically distinct populations in the red clover germplasm holding and showed considerable admixture in individuals within clusters. Neighbour-joining analysis showed intermixing of accessions within groups. Principal component analysis plot complemented the clustering shown by Structure and distinguished three populations to greater extent. Analysis of molecular variance showed that 91% of the genetic variation was residing within populations, while 9% variation was among populations. Overall, the results showed that a high level of genetic diversity is prevailing in this worldwide collection of red clover, which can be exploited for its genetic improvement through breeding approaches.